Critical.
Authoritative.
Strategic.
Subscribe to CIO Magazine »

Texas Memory Systems challenges high-end hard drives with new flash product

The single RamSan 1U array can generate up to 4Gbps of throughput

Texas Memory Systems (TMS), best known for its pricey, yet extremely high-performance NAND flash-based storage arrays, has introduced a new system that it said competes with Tier 1 hard drives on a price-per-gigabyte basis.

TMS's new RamSan-810 storage-area network (SAN) is a 1U (1.75-in.) array filled with enterprise-class multilevel cell (MLC) NAND flash cards. By using MLC NAND instead of pricier single-level cell (SLC) NAND, TMS said it was able to cut the price of the device in half on a per-gigabyte basis.

The RamSan-810

"So it allows us to hit price and density points that compete with Tier 1 enterprise storage instead of just Tier Zero storage," said Jamon Bowen, director of sales engineering at TMS.

Storage in enterprises is classified in tiers. Solid-state drives (SSD) or flash card technology are dubbed Tier Zero, Fibre Channel or SAS drives are considered Tier 1 (primary) storage, and higher-capacity, but slower, SATA drives are classified as Tier 2 (or "nearline") storage.

TMS is aiming its new RamSan at the Tier 1 storage market, which is lead by vendors such as EMC, NetApp, Hitachi Data Systems and Hewlett-Packard.

According to Jim Handy, an analyst at market research firm Objective Analysis, TMS has been one of the last holdouts in the enterprise MLC (eMLC) space, sticking with SLC-only products longer than others.

Over the past few years, a number of startups, including Violin Memory and Nimbus Data Systems, have staked claims in the eMLC storage arena. TMS, however, is a venerated company founded in 1978 that has been selling flash storage since it opened for business.

"They're going down a road few other companies are going down in advocating that data center managers change their architecture to get rid of faster hard drives and just have slower hard drives for bulk of the storage and flash for everything else," Handy said.

TMS is targeting relational databases with its new storage device, just as Fibre Channel drives would be used as the primary storage.

There are two classes of MLC-based flash: consumer and the relatively new enterprise, or eMLC, which has emerged over the past year. The difference between the two is the number of times a drive can be filled to capacity -- or the number of "write cycles" that a drive can endure. In a typical consumer drive, that number varies between 3,000 and 5,000 write cycles, while an eMLC drive can endure an average of 30,000 write cycles, or roughly 10 times more than consumer MLC systems can support. In comparison a top-tier SLC-based SSD can endure up to 100,000 write cycles.

"Our unit is rated for 10 years of life," Bowen said. "That means a user can write 600MB/sec. for the lifetime of the RamSan 810, or 10TB five times per day for 10 years."

TMS said its new RamSan-810 flash array comes at a price of about $13 per gigabyte, including a maintenance license.

In comparison, TMS's high-end SLC-NAND based SAN -- the RamSan-710 -- runs about $26 a gigabyte. For example, the entry-level price for a RamSan-710 and RamSan-810 is about $45,000, but the entry-level 810 comes with 2TB versus 1TB in the 710 model. The RamSan-710, with its SLC-based NAND flash, is about 20% faster than TMS's eMLC product.

Handy said the price is competitive with Fibre Channel and SAS-based hard drive arrays.

The RamSan 810 also has impressive performance statistics. The array can generate a maximum of 320,000 I/Os per second (IOPS), or 4GB/sec bandwidth in a 1U enclosure. A full rack of RamSan-810s, which is 42U, can generate more than 1 million IOPS or almost 500GB/sec.

"Even short-stroking hard drives, you wouldn't get anything like that," said Handy, referring to the practice of using only the outer sector of a hard drive platter in order to achieve the highest-possible performance.

In each 1U RamSan-810 array, there are 20 flash cards, each with 400 NAND flash chips. Each chip has 32GB of capacity. Like the RamSan-710, the new 810 model reserves 30% of its flash capacity for RAID 5 data striping, where one flash chip in 10 is used for parity and the other nine store the data.

Also like its higher-end cousin, the RamSan-810 comes with dual ported 8Gbit/sec. Fibre Channel ports or two InfiniBand ports, along with redundant power and fans.

"This is better than Tier 1 type hard disk systems from EMC and NetApp in that it can fit 10TB into a 1U rack enclosure. We can see replacing entire racks of hard disk enclosures," Bowen said. "The fact is that we can get almost half a petabyte into one rack."

Lucas Mearian covers storage, disaster recovery and business continuity, financial services infrastructure and health care IT for Computerworld. Follow Lucas on Twitter at @lucasmearian, or subscribe to Lucas's RSS feed. His email address is lmearian@computerworld.com.

Read more about storage in Computerworld's Storage Topic Center.

Join the CIO Australia group on LinkedIn. The group is open to CIOs, IT Directors, COOs, CTOs and senior IT managers.

More about: EMC, etwork, Fibre Channel, Hewlett-Packard, Hitachi, Hitachi Data, Hitachi Data Systems, Hitachi Data Systems, MLC, NetApp, NetApp, SAS, Topic
References show all

Comments

Post new comment

The content of this field is kept private and will not be shown publicly.
Users posting comments agree to the CIO comments policy.
Login or register to link comments to your user profile, or you may also post a comment without being logged in.
Related Coverage
Related Whitepapers
Latest Stories
Community Comments
Tags: EMC, hewlett-packard, hitachi, hitachi data systems, netapp, objective, storage, Storage Hardware, Storage Management, storage software, texas memory systems
Latest Blog Posts
Whitepapers
  • Best Practices for Secure Enterprise Content Mobility
    To secure mobile devices while enabling employees to share data securely, organisations need a comprehensive and flexible solution for secure enterprise content mobility. A secure enterprise content mobility solution complements Mobile Device Management (MDM) solutions and enables mobile workers to easily share data with other authorised users, while ensuring that data is always secure and IT operations are always compliant. Read this whitepaper to learn: How the popularity of Bring Your Own Device (BYOD) is creating new security challenges; Why MDM is useful, but not sufficient; How enterprise content mobility provides an essential layer of security and control for organisations with mobile users.
    Learn more »
  • Oracle Exadata - Extreme performance, lowest cost.
    As organizations contend with escalating demands for greater quantities of information, more sophisticated data analysis, and a burgeoning user population, Oracle Exadata makes database workloads faster, easier to manage, and less expensive. Oracle Exadata is the world’s first database machine to provide extreme performance for both data warehousing and online transaction processing (OLTP) applications. Read this whitepaper.
    Learn more »
  • Think print, Think security - Plugging the printer security gap
    The widespread use of networked printers and multifunction peripherals (MFPs) which scan, print, fax, copy and email has increased productivity in the production of all types of business output. However, the growing sophistication of these devices has also increased security risks associated with printing. Network connectivity, along with hard disk and memory storage, means that MFPs are now susceptible to many of the same security risks as PCs and servers alongside the traditional risk of sensitive printed output getting into the wrong hands. However, all too often the security of the print environment is overlooked and little is done to mitigate these threats. Read more.
    Learn more »
All whitepapers
rhs_login_lockGet exclusive access to Invitation only events CIO, reports & analysis.
Recent comments